CONFIGURATIONS & OPERATION
RSB: REMOTE SWIVEL BASE BOLT ON
The swivel mechanism is activated by releasing lever to the vertical position, positioning light
where required and returning lever to locked position.
Supplied with: x1 RSISLASS, x1 RSIRM & x1 BOLT16SS.
RSBM: REMOTE SWIVEL BASE MAGNETIC
The swivel mechanism is activated by releasing lever, positioning light where required and
returning lever to locked position. NOTE: Be careful if mounting to a painted or delicate
surface. Ensure the supplied protective pad is placed between magnet and structure to
minimise possiblity of marking surface.
Supplied with: x1 RSISLASS, x1 RSIRM & x1 BOLT16SS.
RSBS: REMOTE SWIVEL BASE SUCTION
The swivel mechanism is activated by releasing lever, positioning light where required and
returning lever to locked position. The suction cap is activated by swinging the cam lever into
the tensioned position. NOTE: Ensure the surface under the suction cap is clean and smooth
to maximise time of adhesion (moisture may be applied to either surface). It is critical to
keep the rubber suction pad free of any marks.
To clean wash with copious amounts of water and a clean sponge. NEVER clean with cleaning
uid or solvent
Supplied with: x1 RSISLASS, x1 RSIRM & x1 BOLT16SS.
HAND HELD SPOTLIGHT (SL)
& REMOTE MOUNTED SPOTLIGHT (RM) INSERTS
There are two types of inserts supplied with the RSB, RSBM and RSBS:
SL Insert
Supplied already installed
RM Insert
Supplied as an option with an M10 x 16mm full thread bolt.
Directions
To t a Lightforce SL to an RSB, RSBM, RSBS simply screw the Lightforce SL to the already
tted SL insert.
To t a Lightforce RM to an RSB, RSBM and RSBS simply loosen the locking knob and
pull the insert out of the RSB, RSBM and RSBS.
• Replace the standard mounting bolt supplied with the RM light with the
shorter M10 x 16mm bolt supplied.
• Mount the light to the RM insert with the shorter M10 x 16mm bolt.
• Install the RM light complete with RM insert into the RSB, RSBM and RSBS.
• Make sure it is seated all the way and then tighten locking knob. Being careful not
to overtighten.
LIGHTFORCE AUSTRALIA PTY L
TD • 28 Orsmond Street, Hindmarsh SA 5007 Austr
alia • www
.lightforce.com | email:
[email protected] Australia: Tel: 08 8440 0888 | Fax: 08 8346 0504 • Int’l: Tel: +618 8440 0888 | Fax: +618 8346 0504
All logos and images are subject to relevant trademark and copyright protection LIGHTFORCE Pty Ltd | © Jan 2012 • Data and specications contained maybe subject to change without notice.
LIGHTFORCE AUSTRALIA Pty. Ltd., shall be not be liable for damage, malfunction, failure resulting from accident, misuse, misapplication, unauthorised repair, neglect, modication, unauthorised or non standard replacement parts, accessories,
globes, batteries or voltage or the operation of the Product beyond its technical and environmental specications.
INSTRUCTION DATA
PRODUCT: REMOTE SWIVEL BASE SYSTEM
VER: 1.1
DATE: JANUARY 2012
SL Insert
RM Insert
M10 x 16mm Bolt
RM Insert
RM Insert
SL Insert
M10 x 16mm Bolt
SL Insert
M10 x 16mm Bolt
RSB
RSBM
RSBS
1
2
3
1
3
1
2
3
2
31
2
2
31
2
3 1
(1 pages)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals